资源类型

期刊论文 349

会议视频 2

年份

2023 43

2022 32

2021 32

2020 22

2019 29

2018 26

2017 13

2016 14

2015 23

2014 26

2013 18

2012 10

2011 9

2010 12

2009 10

2008 9

2007 16

2005 1

2003 2

2002 1

展开 ︾

关键词

吸附 2

深部开采 2

镍 2

&alpha 1

Tetrasphaera 1

H2S 1

Key technology 1

MOF基催化剂 1

P4 1

PH3 1

PM2.5脱除 1

主–客体络合 1

二氧化碳 1

二氧化碳还原 1

亚铁氰化铜 1

产氧反应 1

催化剂 1

催化剂活化 1

催化氧化 1

展开 ︾

检索范围：

排序： 展示方式：

Ion-imprinted silica gel and its dynamic membrane for nickel ion removal from wastewaters

Jiehui Zeng, Jianxian Zeng, Hu Zhou, Guoqing Liu, Zhengqiu Yuan, Jian Jian

《化学科学与工程前沿（英文）》 2020年 第14卷 第6期   页码 1018-1028 doi: 10.1007/s11705-020-1915-z

摘要： An ion-imprinted sorbent (IIP) was prepared by using Ni as template, 3-[2-(2-aminoethylamino) ethylamino] propyl-trimethoxysilane as functional monomer, and silica gel as carrier. The adsorption performance of IIP towards Ni was investigated. IIP showed a higher adsorption capacity than that of non-imprinted sorbent, and it also exhibited high selectivity for Ni in the presence of Cu and Zn ions. Then, IIP was used to form a dynamic membrane onto the surface of ceramic membrane for treatment of electroplating wastewater containing Ni . Compared with ceramic membrane, IIP dynamic membrane had much higher steady membrane flux, and also rejected Ni to obtain a lower concentration of Ni in the permeate fluid. Perhaps it is suitable for future practice applications.

关键词： ion-imprinted     nickel ion     dynamic membrane     adsorption    

HTML PDF 收藏

Activated carbon induced oxygen vacancies-engineered nickel ferrite with enhanced conductivity for supercapacitor

《化学科学与工程前沿（英文）》 2023年 第17卷 第12期   页码 2088-2100 doi: 10.1007/s11705-023-2352-6

摘要： Activated carbon induced oxygen vacancies-engineered nickel ferrite with enhanced conductivity for supercapacitor application

关键词： nickel ferrite conductivity     carbon oxygen vacancies    

HTML PDF 收藏

Enabling nickel ferrocyanide nanoparticles for high-performance ammonium ion storage

《化学科学与工程前沿（英文）》 2023年 第17卷 第2期   页码 226-235 doi: 10.1007/s11705-022-2198-3

摘要： Prussian blue and its analogs are extensively investigated as a cathode for ammonium-ion batteries. However, they often suffer from poor electronic conductivity. Here, we report a Ni2Fe(CN)6/multiwalled carbon nanotube composite electrode material, which is prepared using a simple coprecipitation approach. The obtained material consists of nanoparticles with sizes 30–50 nm and the multiwalled carbon nanotube embedded in it. The existence of multiwalled carbon nanotube ensures that the Ni2Fe(CN)6/multiwalled carbon nanotube composite shows excellent electrochemical performance, achieving a discharge capacity of 55.1 mAh·g–1 at 1 C and 43.2 mAh·g–1 even at 15 C. An increase in the ammonium-ion diffusion coefficient and ionic/electron conductivity based on kinetic investigations accounts for their high performance. Furthermore, detailed ex situ characterizations demonstrate that Ni2Fe(CN)6/multiwalled carbon nanotube composite offers three advantages: negligible lattice expansion during cycling, stable structure, and the reversible redox couple. Therefore, the Ni2Fe(CN)6/multiwalled carbon nanotube composite presents a long cycling life and high rate capacity. Finally, our study reports a desirable material for ammonium-ion batteries and provides a practical approach for improving the electrochemical performance of Prussian blue and its analogs.

关键词： nickel ferrocyanides     NH4+     electrochemistry     Prussian blue     aqueous ammonium ion batteries    

HTML PDF 收藏

Molybdenum disulfide@nickel phyllosilicate hybrid for improving the flame retardancy and wear resistance

《化学科学与工程前沿（英文）》 2023年 第17卷 第12期   页码 2114-2126 doi: 10.1007/s11705-023-2357-1

摘要： In this study, nickel phyllosilicate was synthesized based on molybdenum disulfide (MoS2@NiPS) by the sol-gel method, and then MoS2@NiPS was used to prepare epoxy composites. The thermal stability, flame retardancy, and frictional performances of epoxy composites were studied. With the addition of 3 wt% MoS2@NiPS, the epoxy composite increased the limiting oxygen index from 23.8% to 26.1% and reduced the vertical burning time from 166 s for epoxy resin to 35 s. The residual char of the epoxy composite increased from 11.8 to 20.2 wt%. MoS2@NiPS promoted the graphitization of the residual char, and facilitated the formation of a dense and continuous char layer, thereby improving the fire safety of epoxy resin. The epoxy composite with 3 wt% MoS2@NiPS had excellent wear resistance property with a wear rate of 2.19 × 10−5 mm3·N–1·m–1, which was 68.8% lower than that of epoxy resin. This study presented a practical approach to improve the frictional and fire resistance of epoxy composites.

关键词： molybdenum disulfide     nickel phyllosilicate     epoxy resin     flame retardancy    

HTML PDF 收藏

Nickel-based metal−organic framework-derived whisker-shaped nickel phyllosilicate toward efficiently

《化学科学与工程前沿（英文）》 2022年 第16卷 第10期   页码 1493-1504 doi: 10.1007/s11705-022-2168-9

摘要： Metal−organic framework-derived materials have attracted significant attention in the applications of functional materials. In this work, the rod-like nickel-based metal−organic frameworks were first synthesized and subsequently employed as the hard templates and nickel sources to prepare the whisker-shaped nickel phyllosilicate using a facile hydrothermal technology. Then, the nickel phyllosilicate whiskers were evaluated to enhance the mechanical, thermal, flammable, and tribological properties of epoxy resin. The results show that adequate nickel phyllosilicate whiskers can disperse well in the matrix, improving the tensile strength and elastic modulus by 13.6% and 56.4%, respectively. Although the addition of nickel phyllosilicate whiskers could not obtain any UL-94 ratings, it enhanced the difficulty in burning the resulted epoxy resin nanocomposites and considerably enhanced thermal stabilities. Additionally, it was demonstrated that such nickel phyllosilicate whiskers preferred to improve the wear resistance instead of the antifriction feature. Moreover, the wear rate of epoxy resin nanocomposites was reduced significantly by 80% for pure epoxy resin by adding 1 phr whiskers. The as-prepared nickel phyllosilicate whiskers proved to be promising reinforcements in preparing of high-performance epoxy resin nanocomposites.

关键词： metal−organic framework     nickel phyllosilicate     whisker     epoxy resin     mechanical response     tribological performance     flammable property    

HTML PDF 收藏

Tool wear mechanisms in the machining of Nickel based super-alloys: A review

Waseem AKHTAR,Jianfei SUN,Pengfei SUN,Wuyi CHEN,Zawar SALEEM

《机械工程前沿（英文）》 2014年 第9卷 第2期   页码 106-119 doi: 10.1007/s11465-014-0301-2

摘要：

Nickel based super-alloys are widely employed in aircraft engines and gas turbines due to their high temperature strength, corrosion resistance and, excellent thermal fatigue properties. Conversely, these alloys are very difficult to machine and cause rapid wear of the cutting tool, frequent tool changes are thus required resulting in low economy of the machining process. This study provides a detailed review of the tool wear mechanism in the machining of nickel based super-alloys. Typical tool wear mechanisms found by different researchers are analyzed in order to find out the most prevalent wear mechanism affecting the tool life. The review of existing works has revealed interesting findings about the tool wear mechanisms in the machining of these alloys. Adhesion wear is found to be the main phenomenon leading to the cutting tool wear in this study.

关键词： tool wear     nickel based super-alloy     wear mechanism    

HTML PDF 收藏

Self-sacrificial templating synthesis of flower-like nickel phyllosilicates and its application as high-performance

《化学科学与工程前沿（英文）》 2022年 第16卷 第4期   页码 484-497 doi: 10.1007/s11705-021-2074-6

摘要： The nanocomposites of flower-like nickel phyllosilicate particles incorporated into epoxy resin were fabricated via an in-situ mixing process. The flower-like nickel phyllosilicate particles were firstly synthesized using a mild self-sacrificial templating method, and the morphology and lamellar structure were examined carefully. Several properties of mechanical, thermal and tribological responses of epoxy nanocomposites were performed. It was demonstrated that adequate flower-like nickel phyllosilicate particles dispersed well in the matrix, and the nanocomposites displayed enhanced tensile strength and elastic modulus but decreased elongation at break as expected. In addition, friction coefficient and wear rate were increased first and then decreased along with the particle content, and showed the lowest values at a mass fraction of 5%. Nevertheless, the incorporated flower-like nickel phyllosilicate particles resulted in the continuously increasing thermal stability of epoxy resin (EP) nanocomposites. This study revealed the giant potential of flower-like particles in preparing high-quality EP nanocomposites.

关键词： nickel phyllosilicate     flow-like structure     mechanical property     thermal stability     tribological performance    

HTML PDF 收藏

Field evidence of decreased extractability of copper and nickel added to soils in 6-year field experiments

Bao Jiang, Dechun Su, Xiaoqing Wang, Jifang Liu, Yibing Ma

《环境科学与工程前沿（英文）》 2018年 第12卷 第2期 doi: 10.1007/s11783-017-0990-y

摘要： The phytotoxicity of added copper (Cu) and nickel (Ni) is influenced by soil properties and field aging. However, the differences in the chemical behavior between Cu and Ni are still unclear. Therefore, this study was conducted to investigate the extractability of added Cu and Ni in 6-year field experiments, as well as the link with their phytotoxicity. The results showed that the extractability of added Cu decreased by 6.63% (5.10%–7.90%), 22.5% (20.6%–23.9%), and 6.87% (0%–17.9%) on average for acidic, neutral, and alkaline soil from 1 to 6 years, although the phytotoxicity of added Cu and Ni did not change significantly from 1 to 6 years in the long term field experiment. Because of dissolution of Cu, when the pH decreased below 7.0, the extractability of Cu in alkaline soil by EDTA at pH 4.0 could not reflect the effects of aging. For Ni, the extractability decreased by 18.1% (10.1%–33.0%), 63.0% (59.2%–68.8%), and 22.0% (12.4%–31.8%) from 1 to 6 years in acidic, neutral, and alkaline soils, respectively, indicating the effects of aging on Ni were greater than on Cu. The sum of ten sequential extractions of Cu and Ni showed that added Cu was more extractable than Ni in neutral and alkaline soil, but similar in acidic soil.

关键词： Copper     Nickel     EDTA     Sequential extraction    

HTML PDF 收藏

Sulfidation/regeneration multicycle testing of nickel-modified ZnFe

Wei LI, Jinju GUO, Jiejie HUANG, Jiaotao ZHAO

《化学科学与工程前沿（英文）》 2010年 第4卷 第4期   页码 435-440 doi: 10.1007/s11705-010-0506-9

摘要： A commercial metal oxide sorbent for the desulphurization of coal-derived gas requires high desulphurization reactivity, mechanical strength, ability to regenerate, and stability to endure many sulfidation-regeneration cycles. In this paper, the sulfur capacity and multiple cycles of a nickel-modified ZnFe O sorbent prepared by the sol-gel auto-combustion method were measured in a fixed-bed reactor at middle temperature of 300°C (sulfidation temperature) and 500°C (regeneration temperature). Also, the BET surface area, pore volume, average pore diameter and X-ray diffraction (XRD) patterns of the sorbent through multicycles were studied. Multicycle runs indicate that the sulfidation reactivity decreases slightly during the second cycle and keeps steady in the following cycles. The results indicate that the nickel-modified ZnFe O keeps high reactivity and structural stability in the multicycle testing of sulfidation/regeneration.

关键词： hot gas desulphurization     nickel-modified ZnFe2O4     sulfidation/regeneration    

HTML PDF 收藏

Polymerization of methyl methacrylate catalyzed by mono-/bis-salicylaldiminato nickel(II) complexes and

Jihong LU, Danfeng ZHANG, Qian CHEN, Buwei YU

《化学科学与工程前沿（英文）》 2011年 第5卷 第1期   页码 19-25 doi: 10.1007/s11705-010-0546-1

摘要： Two types of salicylaldiminato-based nickel complexes, mono-ligated Ni(II) complexes ([O-C H - - C(H)=N-Ar]Ni(PPh )(Ph) ( ), [O-(3,5-Br )C H - -C(H)=N-Ar]Ni(PPh )(Ph) ( ), [O-(3- -Bu)C H - -C(H)=N-Ar]Ni(PPh )(Ph) ( )) and bis-ligated Ni(II) complexes ([O-(3,5-Br )C H - -C(H)=N-Ar] Ni ( ), [O-(3,5-Br )C H - -C(H)=N-2-C H (PhO)] Ni ( ), Ar=2,6-C H ( -Pr) ) were synthesized and characterized by Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR), mass spectrography (MS) and elemental analysis (EA). In the presence of methylaluminoxane (MAO) as cocatalyst, all the nickel complexes exhibited high activities for the polymerization of methyl methacrylate (MMA) and syndiotactic-rich poly(methyl methacrylate) (PMMA) was obtained. The complexes with less bulky substituents on salicylaldiminato framework possessed higher activities, while with the same salicylaldiminato, the mono-ligated nickel complexes showed higher catalytic activity than bis-ligated ones.

关键词： late transition metal catalyst     methyl methacrylate     polymerization     salicylaldiminato nickel complexes     methylaluminoxane     syndiotactic structure    

HTML PDF 收藏

Metal phosphonate-derived cobalt/nickel phosphide@N-doped carbon hybrids as efficient bifunctional oxygen

《化学科学与工程前沿（英文）》 2022年 第16卷 第9期   页码 1367-1376 doi: 10.1007/s11705-022-2153-3

摘要： The exploration of efficient bifunctional electrocatalysts for oxygen reduction reaction and oxygen evolution reaction is pivotal for the development of rechargeable metal–air batteries. Transition metal phosphides are emerging as promising catalyst candidates because of their superb activity and low cost. Herein, a novel metal phosphonate-derived cobalt/nickel phosphide@N-doped carbon hybrid was developed by a carbothermal reduction of cobalt/nickel phosphonate hybrids with different Co/Ni molar ratios. The metal phosphonate derivation method achieved an intimately coupled interaction between metal phosphides and a heteroatom-doped carbon substrate. The resultant Co2P/Ni3P@NC-0.2 enables an impressive electrocatalytic oxygen reduction reaction activity, comparable with those of state-of-the-art Pt/C catalysts in terms of onset potential (0.88 V), 4e‒ selectivity, methanol tolerance, and long-term durability. Moreover, remarkable oxygen evolution reaction activity was also observed in alkaline conditions. The high activity is ascribed to the N-doping, abundant accessible catalytic active sites, and the synergistic effect among the components. This work not only describes a high-efficiency electrocatalyst for both oxygen reduction reaction and oxygen evolution reaction, but also highlights the application of metal phosphonate hybrids in fabricating metal phosphides with tunable structures, which is of great significance in the energy conversion field.

关键词： metal phosphonate     cobalt/nickel phosphide     N-doped carbon     oxygen electrochemistry     Zn−air battery    

HTML PDF 收藏

Hierarchically porous cellulose nanofibril aerogel decorated with polypyrrole and nickel-cobalt layered

《化学科学与工程前沿（英文）》 2023年 第17卷 第10期   页码 1593-1607 doi: 10.1007/s11705-023-2348-2

摘要： With increasing emphasis on green chemistry, biomass-based materials have attracted increased attention regarding the development of highly efficient functional materials. Herein, a new pore-rich cellulose nanofibril aerogel is utilized as a substrate to integrate highly conductive polypyrrole and active nanoflower-like nickel-cobalt layered double hydroxide through in situ chemical polymerization and electrodeposition. This ternary composite can act as an effective self-supported electrode for the electrocatalytic oxidation of glucose. With the synergistic effect of three heterogeneous components, the electrode achieves outstanding glucose sensing performance, including a high sensitivity (851.4 µA·mmol−1·L·cm−2), a short response time (2.2 s), a wide linear range (two stages: 0.001−8.145 and 8.145−35.500 mmol·L−1), strong immunity to interference, outstanding intraelectrode and interelectrode reproducibility, a favorable toxicity resistance (Cl‒), and a good long-term stability (maintaining 86.0% of the original value after 30 d). These data are superior to those of some traditional glucose sensors using nonbiomass substrates. When determining the blood glucose level of a human serum, this electrode realizes a high recovery rate of 97.07%–98.89%, validating the potential for high-performance blood glucose sensing.

关键词： cellulose nanofibril     aerogel     nickel-cobalt layered double hydroxide     polypyrrole     nonenzymatic glucose sensor    

HTML PDF 收藏

Achieving High Strength and Tensile Ductility in Pure Nickel by Cryorolling with Subsequent Low-Temperature

Zhide Li,Hao Gu,Kaiguang Luo,Charlie Kong,Hailiang Yu,

《工程（英文）》 doi: 10.1016/j.eng.2023.01.019

摘要： ty. In this study, cryorolling under different strains followed by low-temperature short-time annealing was used to fabricate pure nickel sheets combining high strength with good ductility. The results show that, for different cryorolling strains, the uniform elongation was greatly increased without sacrificing the strength after annealing. A yield strength of 607 MPa and a uniform elongation of 11.7% were obtained after annealing at a small cryorolling strain (ε = 0.22), while annealing at a large cryorolling strain (ε = 1.6) resulted in a yield strength of 990 MPa and a uniform elongation of 6.4%. X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and electron backscattered diffraction (EBSD) were used to characterize the microstructure of the specimens and showed that the high strength could be attributed to strain hardening during cryorolling, with an additional contribution from grain refinement and the formation of dislocation walls. The high ductility could be attributed to annealing twins and micro-shear bands during stretching, which improved the strain hardening capacity. The results show that the synergistic effect of strength and ductility can be regulated through low-temperature short-time annealing with different cryorolling strains, which provides a new reference for the design of future thermo-mechanical processes.

关键词： Cryorolling     Annealing     Nickel     Strain hardening     Ductility    

HTML PDF 收藏

Erratum to: Self-sacrificial templating synthesis of flower-like nickel phyllosilicates and its application

《化学科学与工程前沿（英文）》 2022年 第16卷 第10期   页码 1531-1531 doi: 10.1007/s11705-022-2241-4

HTML PDF 收藏

Effects of preparation methods of support on the properties of nickel catalyst for hydrogenation of m-dinitrobenzene

LIU Yingxin, WEI Zuojun, CHEN Jixiang, ZHANG Jiyan

《化学科学与工程前沿（英文）》 2007年 第1卷 第3期   页码 287-291 doi: 10.1007/s11705-007-0052-2

摘要： Using tetraethyl orthosilicate (TEOS) as the precursor of silica, the silica aerogel and xerogel, which were used as supports of nickel-based catalysts for liquid hydrogenation of -dinitrobenzene to -phenylenediamine, were prepared by the sol-gel method combined with supercritical drying (SCD) and conventional drying, respectively. Then, a series of nickel-based catalyst samples supported on these supports were prepared by the incipient wetness impregnation method with an aqueous solution of nickel nitrate as well as lanthanum nitrate as impregnation liquids. Based on the characterization results of nitrogen adsorption-desorption (BET), X-ray diffraction (XRD), temperature programmed reduction (TPR), temperature-programmed desorption of hydrogen (H-TPD), and catalytic activity evaluation, the physico-chemical properties and catalytic performances of the catalysts were investigated. The results show that the nickel crystallites on the binary nickel catalyst using silica aerogel as support are of smaller particle size. However, compared with the sample supported on silica xerogel, the nickel catalyst supported on the silica aerogel exhibits lower activity and selectivity for the hydrogenation of -dinitrobenzene because it has a lesser amount of active sites and weaker absorption ability to reactants caused by sintering of the nickel crystallites. The addition of promoter LaO could increase the activity and selectivity of the catalysts. Among all the nickel-based catalyst samples prepared, the LaO promoted ternary nickel-based catalyst supported on silica xerogel exhibits the highest activity and selectivity for the hydrogenation of -dinitrobenzene to -phenylenediamine, which could be attributed to its highest active surface area and appropriate absorption strength to reactants. Over this promising catalyst, the conversion of -dinitrobenzene and the yield of -phenylenediamine could reach 97.0% and 93.1%, respectively, under proper reaction conditions of hydrogen pressure 2.6 MPa, temperature 373 K, and reaction time 1 h.
HTML PDF 收藏

标题 作者 时间 类型 操作

Ion-imprinted silica gel and its dynamic membrane for nickel ion removal from wastewaters

Jiehui Zeng, Jianxian Zeng, Hu Zhou, Guoqing Liu, Zhengqiu Yuan, Jian Jian

期刊论文

Activated carbon induced oxygen vacancies-engineered nickel ferrite with enhanced conductivity for supercapacitor

期刊论文

Enabling nickel ferrocyanide nanoparticles for high-performance ammonium ion storage

期刊论文

Molybdenum disulfide@nickel phyllosilicate hybrid for improving the flame retardancy and wear resistance

期刊论文

Nickel-based metal−organic framework-derived whisker-shaped nickel phyllosilicate toward efficiently

期刊论文

Tool wear mechanisms in the machining of Nickel based super-alloys: A review

Waseem AKHTAR,Jianfei SUN,Pengfei SUN,Wuyi CHEN,Zawar SALEEM

期刊论文

Self-sacrificial templating synthesis of flower-like nickel phyllosilicates and its application as high-performance

期刊论文

Field evidence of decreased extractability of copper and nickel added to soils in 6-year field experiments

Bao Jiang, Dechun Su, Xiaoqing Wang, Jifang Liu, Yibing Ma

期刊论文

Sulfidation/regeneration multicycle testing of nickel-modified ZnFe

Wei LI, Jinju GUO, Jiejie HUANG, Jiaotao ZHAO

期刊论文

Polymerization of methyl methacrylate catalyzed by mono-/bis-salicylaldiminato nickel(II) complexes and

Jihong LU, Danfeng ZHANG, Qian CHEN, Buwei YU

期刊论文

Metal phosphonate-derived cobalt/nickel phosphide@N-doped carbon hybrids as efficient bifunctional oxygen

期刊论文

Hierarchically porous cellulose nanofibril aerogel decorated with polypyrrole and nickel-cobalt layered

期刊论文

Achieving High Strength and Tensile Ductility in Pure Nickel by Cryorolling with Subsequent Low-Temperature

Zhide Li,Hao Gu,Kaiguang Luo,Charlie Kong,Hailiang Yu,

期刊论文

Erratum to: Self-sacrificial templating synthesis of flower-like nickel phyllosilicates and its application

期刊论文

Effects of preparation methods of support on the properties of nickel catalyst for hydrogenation of m-dinitrobenzene

LIU Yingxin, WEI Zuojun, CHEN Jixiang, ZHANG Jiyan

期刊论文